ADA4077-2ARZ
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4077 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Operating Supply Current | 400μA |
| Quiescent Current | 400μA |
| Supply Current-Max | 1.3mA |
| Slew Rate | 1.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 128 dB |
| Current - Input Bias | 400pA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 35μV |
| Bandwidth | 4MHz |
| Gain Bandwidth Product | 3.6MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3900 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 128dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 15μV |
| Current - Output / Channel | 10mA |
| Micropower | YES |
| Max Frequency | 1kHz |
| Bias Current-Max (IIB) @25C | 0.001μA |
| Input Capacitance | 5pF |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
ADA4077-2ARZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tube case. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 35μV. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 400μA and 10 . There should be no change in the voltage gain. 2 channels are available on the instrumentation amplifier. Linear amplifier has a quiescent current of 400μA.
ADA4077-2ARZ Features
8 Pins
supply voltage of 5V
130dB voltage gain
ADA4077-2ARZ Applications
There are a lot of Analog Devices Inc. ADA4077-2ARZ Instrumentational OP Amps applications.
- Instrumentation
- Information processing
- Precision measurement
- Displayers for aircraft and air transportation control systems
- Signal transformation
- Laptop
- Band-pass filter
- Switching amplifier
- Band-stop filter
- Portable docking station
