ADA4077-2BRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4077 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Operating Supply Current | 400μA |
| Quiescent Current | 400μA |
| Supply Current-Max | 1.3mA |
| Slew Rate | 1.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 128 dB |
| Current - Input Bias | 400pA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 35μV |
| Bandwidth | 4MHz |
| Gain Bandwidth Product | 3.6MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3900 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 128dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 10μV |
| Current - Output / Channel | 10mA |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.001μA |
| Input Capacitance | 5pF |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4077-2BRZ Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 8 pins. Op amp rates 35μV as input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using a supply current of 400μA , this buffer op amp will be able to operate. 130dB should remain the voltage gain. 2 channels are available on the instrumentation amplifier. The current is quiescent at 400μA.
ADA4077-2BRZ Features
8 Pins
supply voltage of 5V
130dB voltage gain
ADA4077-2BRZ Applications
There are a lot of Analog Devices Inc. ADA4077-2BRZ Instrumentational OP Amps applications.
- Power control
- Logarithmic operation circuits
- Radiation thermometry transducers
- Television
- ECG equipment
- Television broadcasting equipment
- Switching amplifier
- Oscilloscopes
- Vehicle electronics
- Wireless base stations
