ADA4077-2BRZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4077 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Operating Supply Current | 400μA |
| Quiescent Current | 400μA |
| Supply Current-Max | 1.3mA |
| Slew Rate | 1.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 128 dB |
| Current - Input Bias | 400pA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 35μV |
| Gain Bandwidth Product | 3.6MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3900 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 128dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 10μV |
| Current - Output / Channel | 10mA |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.001μA |
| Input Capacitance | 5pF |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4077-2BRZ-RL Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 35μV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. As long as the supply current of the chip does not exceed 400μA, this op amp ic can operate. 130dB should be the voltage gain. The total number of elements in this buffer amplifier is 2. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. As a result, linear amplifier's quiescent current is 400μA.
ADA4077-2BRZ-RL Features
8 Pins
supply voltage of 5V
130dB voltage gain
ADA4077-2BRZ-RL Applications
There are a lot of Analog Devices Inc. ADA4077-2BRZ-RL Instrumentational OP Amps applications.
- Automatic control
- Television broadcasting equipment
- Displayers for aircraft and air transportation control systems
- Division circuits
- Tablets
- Communication
- MP3
- High speed sample
- Medical imaging
- Mobile phone
