Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
140.30179mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADA4077 |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Power Supplies |
+-2.5/+-15/5/30V |
Number of Channels |
4 |
Operating Supply Current |
400μA |
Quiescent Current |
400μA |
Supply Current-Max |
2.6mA |
Slew Rate |
1.2V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
132 dB |
Current - Input Bias |
400pA |
Max Input Voltage |
36V |
Voltage - Supply, Single/Dual (±) |
±2.5V~15V |
Output Current per Channel |
10mA |
Input Offset Voltage (Vos) |
35μV |
Bandwidth |
3.9MHz |
Gain Bandwidth Product |
3.6MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
3900 kHz |
Voltage Gain |
130dB |
Average Bias Current-Max (IIB) |
0.0015μA |
Power Supply Rejection Ratio (PSRR) |
128dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
18V |
Voltage - Input Offset |
15μV |
Settling Time |
10 μs |
Low-Bias |
NO |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.001μA |
Programmable Power |
NO |
Height |
1.05mm |
Length |
5.1mm |
Width |
4.5mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADA4077-4ARUZ Overview
It is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. A General Purpose-type buffer amplifier is shown here. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 14. Linear amplifier has a total of 14 pins. Please take in mind that op amp should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 14 pins that make up the linear amplifier. There is an input offset voltage of 35μV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using a supply current of 400μA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 130dB at all times. Instrumentation amplifier has 4 channels on it. The operating supply voltage of the buffer op amp is rated at 5V. The quiescent current is 400μA.
ADA4077-4ARUZ Features
14 Pins
supply voltage of 5V
130dB voltage gain
ADA4077-4ARUZ Applications
There are a lot of Analog Devices Inc. ADA4077-4ARUZ Instrumentational OP Amps applications.
- Video computer boards
- Fast A/D and D/A converters
- Automotive sensors
- Switching amplifier
- Band-stop filter
- Signal transformation
- Image computer boards
- Video data acquisition
- Measurements of Wheatstone bridge
- Tablets