ADA4077-4ARUZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4077 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | +-2.5/+-15/5/30V |
| Number of Circuits | 4 |
| Operating Supply Current | 400μA |
| Quiescent Current | 400μA |
| Supply Current-Max | 2.6mA |
| Slew Rate | 1.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 400pA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 35μV |
| Gain Bandwidth Product | 3.6MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3900 kHz |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 128dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 15μV |
| Settling Time | 10 μs |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.001μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Wideband | NO |
| Voltage Gain-Min | 1000000 |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4077-4ARUZ-R7 Overview
In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 14. Buffer amplifier has a total of 14 pins. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 35μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. An 400μA volt supply current is needed for this linear amplifier to operate. During the manufacturing process, this buffer amplifier is divided into 4 circuits. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. The current is quiescent at 400μA. There is a minimum voltage gain of 1000000 that this buffer op amp is capable of conducting.
ADA4077-4ARUZ-R7 Features
14 Pins
supply voltage of 5V
ADA4077-4ARUZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4077-4ARUZ-R7 Instrumentational OP Amps applications.
- Medical imaging
- Semiconductor detectors
- Weighing systems
- Polarized electrodes
- E-book readers
- Navigation
- Fast A/D and D/A converters
- Car stereo
- Band-stop filter
- Measurements of Wheatstone bridge
