ADA4084-2ARMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4084 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-15/3/30V |
| Number of Channels | 2 |
| Operating Supply Current | 1.19mA |
| Quiescent Current | 595μA |
| Slew Rate | 4.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 140nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 15.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 15900 kHz |
| Voltage Gain | 112dB |
| Average Bias Current-Max (IIB) | 0.45μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 130μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 13.9MHz |
| Bias Current-Max (IIB) @25C | 0.3μA |
| Programmable Power | NO |
| Input Capacitance | 2.9pF |
| Wideband | NO |
| Input Voltage Noise Density | 3.9nV/sqrt Hz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4084-2ARMZ-R7 Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 100μV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . An 1.19mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. Buffer op amp is equipped with 2 channels on the device. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. To pack the operational amplifier ics, TR is adopted as the packing method. There is an 595μA quiescent current running through op amp ic.
ADA4084-2ARMZ-R7 Features
8 Pins
supply voltage of 5V
112dB voltage gain
Output Type: Rail-to-Rail
ADA4084-2ARMZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4084-2ARMZ-R7 Instrumentational OP Amps applications.
- pH (acidity)
- Computer workstations
- Biopotential
- Displayers for aircraft and air transportation control systems
- Commercial audio systems
- Image computer boards
- Semiconductor detectors
- Polarized electrodes
- Automotive sensors
- Power transmission
