ADA4084-2ARZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4084 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-15/3/30V |
| Number of Channels | 2 |
| Operating Supply Current | 1.19mA |
| Quiescent Current | 595μA |
| Slew Rate | 4.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 140nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 15.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 15900 kHz |
| Voltage Gain | 112dB |
| Average Bias Current-Max (IIB) | 0.45μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 13.9MHz |
| Bias Current-Max (IIB) @25C | 0.3μA |
| Programmable Power | NO |
| Input Capacitance | 2.9pF |
| Wideband | NO |
| Input Voltage Noise Density | 3.9nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4084-2ARZ-R7 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 8-pin op amp ic is included in the package. Op amp ic rates 100μV for input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using an 1.19mA supply current, this operational amplifier ics can be operated. 112dB should be the voltage gain. The op amp ic has 2 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. TAPE AND REEL is adopted to pack the instrumentation amplifier. There is an 595μA quiescent current in linear amplifier.
ADA4084-2ARZ-R7 Features
8 Pins
supply voltage of 5V
112dB voltage gain
Output Type: Rail-to-Rail
ADA4084-2ARZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4084-2ARZ-R7 Instrumentational OP Amps applications.
- Test equipment
- earphone
- Professional videography
- Portable media players
- Ultrasound transducers
- Power transmission
- Micro signal measurement
- Non-polarized electrodes
- High gain DC amplifier
- Industrial applications including automation
