ADA4084-2ARZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4084 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-15/3/30V |
| Number of Channels | 2 |
| Operating Supply Current | 1.19mA |
| Quiescent Current | 595μA |
| Slew Rate | 4.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 140nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 15.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 15900 kHz |
| Voltage Gain | 112dB |
| Average Bias Current-Max (IIB) | 0.45μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 13.9MHz |
| Bias Current-Max (IIB) @25C | 0.3μA |
| Programmable Power | NO |
| Input Capacitance | 2.9pF |
| Wideband | NO |
| Input Voltage Noise Density | 3.9nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4084-2ARZ-RL Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. A Tape & Reel (TR) case is used to deliver the buffer op amp. We are approaching the 8h termination of the year. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 8-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 100μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. You can run this op amp ic on 1.19mA . You should keep the voltage gain at 112dB for the time being. Buffer op amp is equipped with 2 channels on the device. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. Linear amplifier has a quiescent current of 595μA.
ADA4084-2ARZ-RL Features
8 Pins
supply voltage of 5V
112dB voltage gain
Output Type: Rail-to-Rail
ADA4084-2ARZ-RL Applications
There are a lot of Analog Devices Inc. ADA4084-2ARZ-RL Instrumentational OP Amps applications.
- Image computer boards
- ECG equipment
- Portable media players
- Oscilloscopes
- Tablets
- Inverse/same-phase proportional circuit
- Information processing
- Industrial applications including automation
- Comparator
- Fission chambers
