ADA4091-2ACPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4091 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-15/3/30V |
| Number of Channels | 2 |
| Operating Supply Current | 400μA |
| Quiescent Current | 200μA |
| Supply Current-Max | 0.7mA |
| Slew Rate | 0.46V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 121 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 250μV |
| Gain Bandwidth Product | 1.27MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1220 kHz |
| Voltage Gain | 117dB |
| Average Bias Current-Max (IIB) | 0.35μA |
| Power Supply Rejection Ratio (PSRR) | 126dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 35μV |
| Settling Time | 22 μs |
| Micropower | YES |
| Input Voltage Noise Density | 24nV/sqrt Hz |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4091-2ACPZ-RL Overview
In the package, you will find a 8-WFDFN Exposed Pad, CSP-case to contain the op amp ic. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 8 pins. There is an input offset voltage of 250μV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. An 400μA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 117dB at all times. Op amp ic has 2 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. As a result, linear amplifier's quiescent current is 200μA.
ADA4091-2ACPZ-RL Features
8 Pins
supply voltage of 5V
117dB voltage gain
Output Type: Rail-to-Rail
ADA4091-2ACPZ-RL Applications
There are a lot of Analog Devices Inc. ADA4091-2ACPZ-RL Instrumentational OP Amps applications.
- Navigation
- Television broadcasting equipment
- Non-polarized electrodes
- Proportional counter tubes
- Digital cameras
- RF cable systems
- PDA
- Laptop
- High input resistance broadband
- Displayers for aircraft and air transportation control systems
