ADA4091-2ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4091 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 400μA |
| Quiescent Current | 200μA |
| Supply Current-Max | 0.7mA |
| Slew Rate | 0.46V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 121 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 1.22MHz |
| Gain Bandwidth Product | 1.27MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1220 kHz |
| Voltage Gain | 117dB |
| Average Bias Current-Max (IIB) | 0.35μA |
| Power Supply Rejection Ratio (PSRR) | 126dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 35μV |
| Settling Time | 22 μs |
| Micropower | YES |
| Input Voltage Noise Density | 24nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4091-2ARZ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The buffer op amp includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 250μV. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. This op amp can operate from a supply current at 400μA. The voltage gain should stay at 117dB. Instrumentation amplifier has 2 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The current is quiescent at 200μA.
ADA4091-2ARZ Features
8 Pins
supply voltage of 5V
117dB voltage gain
Output Type: Rail-to-Rail
ADA4091-2ARZ Applications
There are a lot of Analog Devices Inc. ADA4091-2ARZ Instrumentational OP Amps applications.
- Scintillation detectors
- Band-stop filter
- Subtraction operation circuits
- Medical instruments
- Polarized electrodes
- Switching amplifier
- High input resistance broadband
- Division circuits
- Ultrasound transducers
- pH (acidity)
