ADA4091-4ACPZ-R2
| Parameters | |
|---|---|
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-18/3/36V |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Operating Supply Current | 200μA |
| Quiescent Current | 200μA |
| Slew Rate | 0.46V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 121 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 35μV |
| Bandwidth | 1.22MHz |
| Gain Bandwidth Product | 1.27MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1220 kHz |
| Voltage Gain | 117dB |
| Average Bias Current-Max (IIB) | 0.35μA |
| Power Supply Rejection Ratio (PSRR) | 108dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height Seated (Max) | 0.8mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4091 |
ADA4091-4ACPZ-R2 Overview
In the package, you will find a 16-WQFN Exposed Pad, CSP-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There have been a total of 16 terminations over the past year. There are a total of 16 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. Instrumentation amplifier is a part of Operational Amplifier. 16 pins are located on the operational amplifiers. There is an input offset voltage of 35μV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using an 200μA supply current, this operational amplifier ics can be operated. 117dB should be the voltage gain. The buffer amp consists of 4 circuits in total. Buffer op amp is equipped with 4 channels on the device. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. The quiescent current is 200μA.
ADA4091-4ACPZ-R2 Features
16 Pins
supply voltage of 5V
117dB voltage gain
Output Type: Rail-to-Rail
ADA4091-4ACPZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4091-4ACPZ-R2 Instrumentational OP Amps applications.
- Automotive sensors
- pH (acidity)
- Industrial control system
- Displayers for aircraft and air transportation control systems
- Video amplifiers
- Television broadcasting equipment
- High speed sample
- Fission chambers
- Blood pressure sensors
- Professional videography
