ADA4091-4ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4091 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-18/3/36V |
| Number of Channels | 4 |
| Operating Supply Current | 800μA |
| Quiescent Current | 200μA |
| Slew Rate | 0.46V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 121 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 250μV |
| Gain Bandwidth Product | 1.27MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1220 kHz |
| Voltage Gain | 117dB |
| Average Bias Current-Max (IIB) | 0.35μA |
| Power Supply Rejection Ratio (PSRR) | 126dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 35μV |
| Settling Time | 22 μs |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Wideband | NO |
| Height Seated (Max) | 0.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4091-4ACPZ-R7 Overview
It is packaged in an 16-WQFN Exposed Pad, CSP-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There have been a total of 16 terminations over the past year. There are a total of 16 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 16 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 250μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . This op amp can operate from a supply current at 800μA. There should be no change in the voltage gain at 117dB. Instrumentation amplifier has 4 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. There is an 200μA quiescent current in linear amplifier.
ADA4091-4ACPZ-R7 Features
16 Pins
supply voltage of 5V
117dB voltage gain
Output Type: Rail-to-Rail
ADA4091-4ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4091-4ACPZ-R7 Instrumentational OP Amps applications.
- Commercial audio systems
- Home audio systems
- Scintillation detectors
- PDA
- Biopotential
- Automotive sensors
- Radiation thermometry transducers
- Power transmission
- Instrumentation
- Semiconductor detectors
