ADA4092-4ARUZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4092 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-15/3/30V |
| Number of Channels | 4 |
| Operating Supply Current | 800μA |
| Quiescent Current | 200μA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 103 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 1.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -1.5V |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 117dB |
| Average Bias Current-Max (IIB) | 0.275μA |
| Power Supply Rejection Ratio (PSRR) | 112dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 200μV |
| Settling Time | 25 μs |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Wideband | NO |
| Input Voltage Noise Density | 30nV/sqrt Hz |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4092-4ARUZ-RL Overview
Op amp is packaged in 14-TSSOP (0.173, 4.40mm Width) case. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 14. The pins on this board total to 14 in total. This linear amplifier should be powered by an 1.5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 14 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. Operational amplifier can operate supply current at 800μA. It is recommended to keep the voltage gain at 117dB at all times. Op amp ic has 4 channels. On the output type, there are Rail-to-Rail different types of op amps. The instrumentation amplifier is packed in the form of TAPE AND REEL. Buffer amplifier has a quiescent current of 200μA.
ADA4092-4ARUZ-RL Features
14 Pins
supply voltage of 1.5V
117dB voltage gain
Output Type: Rail-to-Rail
ADA4092-4ARUZ-RL Applications
There are a lot of Analog Devices Inc. ADA4092-4ARUZ-RL Instrumentational OP Amps applications.
- Band-pass filter
- Navigation
- High speed sample
- single/dual op amp sum and difference circuits
- Instrumentation
- High input resistance broadband
- PDA
- Test and measurement instruments
- Communication device
- Commercial audio systems
