ADA4096-2ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN Exposed Pad, CSP |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4096 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 120μA |
| Quiescent Current | 60μA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 3nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 786 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 595 kHz |
| Voltage Gain | 111dB |
| Average Bias Current-Max (IIB) | 0.019μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 35μV |
| Micropower | YES |
| -3db Bandwidth | 1.52MHz |
| Bias Current-Max (IIB) @25C | 0.015μA |
| Input Capacitance | 7pF |
| Input Voltage Noise Density | 27nV/sqrt Hz |
| Height Seated (Max) | 0.65mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4096-2ACPZ-R7 Overview
In the package, you will find a 8-UFDFN Exposed Pad, CSP-case to contain the op amp ic. An op amp of this type is a General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 300μV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . This op amp can operate from a supply current at 120μA. Keeping the voltage gain at 111dB is the best course of action. Instrumentation amplifier has 2 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The linear amplifier is packaged by using a TAPE AND REEL axis. As a result, linear amplifier's quiescent current is 60μA.
ADA4096-2ACPZ-R7 Features
8 Pins
supply voltage of 5V
111dB voltage gain
Output Type: Rail-to-Rail
ADA4096-2ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4096-2ACPZ-R7 Instrumentational OP Amps applications.
- Television
- Band-stop filter
- pH (acidity)
- Oscilloscopes
- Video amplifiers
- Power generator
- Television broadcasting equipment
- Exponential operation circuits
- Wireless base stations
- Test equipment
