banner_page

ADA4096-2ARMZ

2 Channels 10mA per Channel 3nA 77 dB Instrumentational OP Amps 0.019μA 3V~30V ±1.5V~15V ADA4096 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADA4096-2ARMZ
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 854
  • Description: 2 Channels 10mA per Channel 3nA 77 dB Instrumentational OP Amps 0.019μA 3V~30V ±1.5V~15V ADA4096 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 months ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number ADA4096
Pin Count 8
Output Type Rail-to-Rail
Power Supplies +-1.5/+-15V
Number of Channels 2
Operating Supply Current 120μA
Quiescent Current 60μA
Slew Rate 0.4V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 77 dB
Current - Input Bias 3nA
Voltage - Supply, Single/Dual (±) 3V~30V ±1.5V~15V
Output Current per Channel 10mA
Input Offset Voltage (Vos) 300μV
Bandwidth 501 kHz
Gain Bandwidth Product 786kHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 595 kHz
Voltage Gain 111dB
Average Bias Current-Max (IIB) 0.019μA
Power Supply Rejection Ratio (PSRR) 100dB
Low-Offset YES
Frequency Compensation YES
Voltage - Input Offset 35μV
Micropower YES
-3db Bandwidth 152kHz
Bias Current-Max (IIB) @25C 0.015μA
Input Capacitance 7pF
Input Voltage Noise Density 27nV/sqrt Hz
Height 950μm
Length 3.2mm
Width 3.2mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADA4096-2ARMZ Overview


Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. The input offset voltage is 300μV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 120μA, this op amp ic can operate. There should be no change in the voltage gain. Buffer op amp is equipped with 2 channels on the device. On the output type, there are Rail-to-Rail different types of op amps. 60μA quiescent currents are flowing through buffer op amp.

ADA4096-2ARMZ Features


8 Pins
supply voltage of 5V
111dB voltage gain
Output Type: Rail-to-Rail

ADA4096-2ARMZ Applications


There are a lot of Analog Devices Inc. ADA4096-2ARMZ Instrumentational OP Amps applications.

  • Communication
  • Laptop
  • Signal filtering
  • Cinema or auditorium audio system
  • Semiconductor detectors
  • ECG equipment
  • Computer workstations
  • Automation control systems
  • Instrumentation
  • Television broadcasting equipment

Write a review

Note: HTML is not translated!
    Bad           Good