ADA4096-2WARMZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4096 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 120μA |
| Quiescent Current | 60μA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 3nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 786kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 595 kHz |
| Voltage Gain | 111dB |
| Average Bias Current-Max (IIB) | 0.019μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 35μV |
| Micropower | YES |
| -3db Bandwidth | 152kHz |
| Bias Current-Max (IIB) @25C | 0.015μA |
| Screening Level | AEC-Q100 |
| Input Capacitance | 7pF |
| Input Voltage Noise Density | 27nV/sqrt Hz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4096-2WARMZ-RL Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. Op amps are General Purpose types of amplifier on the chip. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. We are approaching the 8h termination of the year. Linear amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 8 pins on this chip. Op amp ic rates 300μV for input offset voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . A supply current of 120μA can be used to operate this linear amplifier. There should be no change in the voltage gain. The op amp ic has 2 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. It is used TAPE AND REEL to pack the op amps. In this case, Automotive represents the instrumentation amplifiers' series number. Linear amplifier has a quiescent current of 60μA.
ADA4096-2WARMZ-RL Features
8 Pins
supply voltage of 5V
111dB voltage gain
Output Type: Rail-to-Rail
ADA4096-2WARMZ-RL Applications
There are a lot of Analog Devices Inc. ADA4096-2WARMZ-RL Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Industrial applications including automation
- Micro signal measurement
- Instrumentation
- Portable electronic products powered by batteries
- Power control
- Weak signal detection
- MP3
- Automation control systems
- Non-polarized electrodes
