ADA4096-4ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4096 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 240μA |
| Quiescent Current | 60μA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 786 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 595 kHz |
| Voltage Gain | 111dB |
| Average Bias Current-Max (IIB) | 0.03μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 35μV |
| Settling Time | 23.4 μs |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 1.52MHz |
| Bias Current-Max (IIB) @25C | 0.025μA |
| Programmable Power | NO |
| Input Capacitance | 7pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 27nV/sqrt Hz |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4096-4ACPZ-R7 Overview
It is packaged in an 16-WFQFN Exposed Pad, CSP-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. There is a Cut Tape (CT) case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 16 terminations. A total of 16 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 16 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 300μV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 240μA and 10 . Maintain 111dB as the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. As a result of this, the buffer amplifier is packed in TAPE AND REEL. The current is quiescent at 60μA.
ADA4096-4ACPZ-R7 Features
16 Pins
supply voltage of 5V
111dB voltage gain
Output Type: Rail-to-Rail
ADA4096-4ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4096-4ACPZ-R7 Instrumentational OP Amps applications.
- Video computer boards
- Multimedia playback equipment
- Division circuits
- Automation control systems
- Medical instruments
- High/low-pass filter circuit
- Oscilloscopes
- Information processing
- Communication
- single/dual op amp sum and difference circuits
