ADA4096-4ACPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4096 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-15V |
| Operating Supply Current | 240μA |
| Quiescent Current | 60μA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 786kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 595 kHz |
| Voltage Gain | 111dB |
| Average Bias Current-Max (IIB) | 0.03μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 35μV |
| Settling Time | 23.4 μs |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 1.52MHz |
| Bias Current-Max (IIB) @25C | 0.025μA |
| Programmable Power | NO |
| Input Capacitance | 7pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Wideband | NO |
| Input Voltage Noise Density | 27nV/sqrt Hz |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4096-4ACPZ-RL Overview
It is packaged in an 16-WFQFN Exposed Pad, CSP-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be at least 16 terminations this year. There are a total of 16 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 16 pins on it. Op amp rates 300μV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 240μA . It is recommended to keep the voltage gain at 111dB at all times. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The op amp is rated for an operating supply voltage of 4. As a result of this, the buffer amplifier is packed in TAPE AND REEL. Linear amplifier has a quiescent current of 60μA.
ADA4096-4ACPZ-RL Features
16 Pins
supply voltage of 5V
111dB voltage gain
Output Type: Rail-to-Rail
ADA4096-4ACPZ-RL Applications
There are a lot of Analog Devices Inc. ADA4096-4ACPZ-RL Instrumentational OP Amps applications.
- RF cable systems
- PDA
- Hand-held batteries
- Voltage regulation circuit
- Fission chambers
- Video amplifiers
- Industrial control system
- pH (acidity)
- Logarithmic operation circuits
- Non-polarized electrodes
