ADA4096-4ARUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4096 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 240μA |
| Quiescent Current | 60μA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 786 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 595 kHz |
| Voltage Gain | 111dB |
| Average Bias Current-Max (IIB) | 0.03μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 35μV |
| Settling Time | 23.4 μs |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 1.52MHz |
| Max Frequency | 1kHz |
| Bias Current-Max (IIB) @25C | 0.025μA |
| Programmable Power | NO |
| Input Capacitance | 7pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 27nV/sqrt Hz |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4096-4ARUZ Overview
It is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tube case. There have been a total of 14 terminations over the past year. A total of 14 pins are located on this board. I would like to remind you that this buffer op amp should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 14 pins. Op amp rates 300μV as input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 240μA . 111dB should remain the voltage gain. Buffer op amp is equipped with 4 channels on the device. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. 60μA quiescent currents are flowing through buffer op amp.
ADA4096-4ARUZ Features
14 Pins
supply voltage of 5V
111dB voltage gain
Output Type: Rail-to-Rail
ADA4096-4ARUZ Applications
There are a lot of Analog Devices Inc. ADA4096-4ARUZ Instrumentational OP Amps applications.
- Communication device
- Comparator
- Hand-held batteries
- Computer workstations
- High speed sample
- Commercial audio systems
- High input resistance broadband
- Subtraction operation circuits
- Band-stop filter
- Radar
