ADA4096-4ARUZ-R7
| Parameters | |
|---|---|
| -3db Bandwidth | 1.52MHz |
| Bias Current-Max (IIB) @25C | 0.025μA |
| Programmable Power | NO |
| Input Capacitance | 7pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Wideband | NO |
| Input Voltage Noise Density | 27nV/sqrt Hz |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4096 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-15V |
| Operating Supply Current | 240μA |
| Quiescent Current | 60μA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 786kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 595 kHz |
| Voltage Gain | 111dB |
| Average Bias Current-Max (IIB) | 0.03μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 35μV |
| Settling Time | 23.4 μs |
| Low-Bias | NO |
| Micropower | YES |
ADA4096-4ARUZ-R7 Overview
There is a 14-TSSOP (0.173, 4.40mm Width) case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape (CT) case. The number of terminations approaches 14. It consists of a total of 14 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 14-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 300μV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Operational amplifier can operate supply current at 240μA. There should be no change in the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 4. This linear amplifier pack is based on the TAPE AND REEL axis. There is an 60μA quiescent current running through op amp ic.
ADA4096-4ARUZ-R7 Features
14 Pins
supply voltage of 5V
111dB voltage gain
Output Type: Rail-to-Rail
ADA4096-4ARUZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4096-4ARUZ-R7 Instrumentational OP Amps applications.
- Video computer boards
- Home audio systems
- Video data acquisition
- Proportional counter tubes
- ECG equipment
- Weighing systems
- Blood pressure sensors
- Laptop
- High-frequency data acquisition systems
- Vehicle electronics
