ADA4177-2ARMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4177 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 500μA |
| Slew Rate | 1.5V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 128 dB |
| Current - Input Bias | 300pA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 2μV |
| Gain Bandwidth Product | 3.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 114dB |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Dual Supply Voltage | 5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4177-2ARMZ-R7 Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. This is a General Purpose type op amp. A Tape & Reel (TR) case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are located on this board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 2μV voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . As long as the supply current of the chip does not exceed 500μA, this op amp ic can operate. Maintain 114dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals.
ADA4177-2ARMZ-R7 Features
8 Pins
supply voltage of 5V
114dB voltage gain
Output Type: Rail-to-Rail
ADA4177-2ARMZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4177-2ARMZ-R7 Instrumentational OP Amps applications.
- Digital cameras
- High gain DC amplifier
- Tablets
- Communication
- Communication device
- Automatic control
- Laptop
- High speed sample
- Power control
- Navigation
