ADA4177-4ARUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4177 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 4 |
| Operating Supply Current | 500μA |
| Slew Rate | 1.5V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 128 dB |
| Current - Input Bias | 300pA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 2μV |
| Bandwidth | 3.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Supply Voltage Limit-Max | 18V |
| Max Frequency | 1kHz |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 5.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4177-4ARUZ Overview
A 14-TSSOP (0.173, 4.40mm Width) case is used to package the op amp. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tube case. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 14 pins. There is an input offset voltage of 2μV for this buffer op amp. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . As long as the supply current of the chip does not exceed 500μA, this op amp ic can operate. Maintain 120dB as the voltage gain. A linear amplifier like this has 4 circuits on it. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals.
ADA4177-4ARUZ Features
14 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
ADA4177-4ARUZ Applications
There are a lot of Analog Devices Inc. ADA4177-4ARUZ Instrumentational OP Amps applications.
- Scintillation detectors
- Ultrasound transducers
- pH (acidity)
- Video conversion and routing
- Computer workstations
- Proportional operation circuits
- single/dual op amp sum and difference circuits
- Micro signal measurement
- Automatic control
- Subtraction operation circuits
