ADA4177-4ARUZ-R7
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 2μV |
| Gain Bandwidth Product | 3.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Supply Voltage Limit-Max | 18V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4177 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 4 |
| Operating Supply Current | 500μA |
| Slew Rate | 1.5V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 128 dB |
| Current - Input Bias | 300pA |
ADA4177-4ARUZ-R7 Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 14. It consists of a total of 14 pins in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 14 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 2μV voltage. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using a supply current of 500μA , this buffer op amp will be able to operate. 120dB should be the voltage gain. A linear amplifier like this has 4 circuits on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals.
ADA4177-4ARUZ-R7 Features
14 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
ADA4177-4ARUZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4177-4ARUZ-R7 Instrumentational OP Amps applications.
- Semiconductor detectors
- Band-pass filter
- Communication device
- Integrator circuits
- Instrumentation
- Power transmission
- Image computer boards
- Hand-held batteries
- Information processing
- Proportional operation circuits
