ADA4177-4ARZ-RL
| Parameters | |
|---|---|
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Supply Voltage Limit-Max | 18V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4177 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 4 |
| Operating Supply Current | 500μA |
| Slew Rate | 1.5V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 128 dB |
| Current - Input Bias | 300pA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 2μV |
| Gain Bandwidth Product | 3.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3500 kHz |
ADA4177-4ARZ-RL Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 14h termination of the year. It consists of a total of 14 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 14 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 2μV. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . A supply current of 500μA can be used to operate this linear amplifier. There should be no change in the voltage gain. There are 4 circuits on op amps. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages.
ADA4177-4ARZ-RL Features
14 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
ADA4177-4ARZ-RL Applications
There are a lot of Analog Devices Inc. ADA4177-4ARZ-RL Instrumentational OP Amps applications.
- Signal filtering
- Signal transformation
- MP3
- Band-pass filter
- Navigation
- High-frequency data acquisition systems
- single/dual op amp sum and difference circuits
- Fission chambers
- Vehicle electronics
- pH (acidity)
