ADA4500-2ARMZ
| Parameters | |
|---|---|
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 10MHz |
| Programmable Power | NO |
| Input Capacitance | 5pF |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Height | 950μm |
| Length | 3.2mm |
| Width | 3.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | DMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4500 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 2.3mA |
| Quiescent Current | 1.55mA |
| Supply Current-Max | 3.6mA |
| Slew Rate | 5.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 75mA |
| Input Offset Voltage (Vos) | 120μV |
| Bandwidth | 19.2MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.00019μA |
| Power Supply Rejection Ratio (PSRR) | 119dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
ADA4500-2ARMZ Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 8 pins on it. The input offset voltage is 120μV. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAn 2.3mA volt supply current is needed for this linear amplifier to operate. You should keep the voltage gain at 130dB for the time being. There are 2 circuits on op amps. Buffer op amp is equipped with 2 channels on the device. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The quiescent current is 1.55mA.
ADA4500-2ARMZ Features
8 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
ADA4500-2ARMZ Applications
There are a lot of Analog Devices Inc. ADA4500-2ARMZ Instrumentational OP Amps applications.
- Subtraction operation circuits
- High/low-pass filter circuit
- Polarized electrodes
- Strain gauges
- High input resistance broadband
- Weighing systems
- Comparator
- High speed sample
- Ultrasound transducers
- Test and measurement instruments
