ADA4505-1ACBZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4505 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 9μA |
| Quiescent Current | 9μA |
| Slew Rate | 0.006V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 50 kHz |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.000375μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000002μA |
| Programmable Power | NO |
| Input Capacitance | 4.7pF |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4505-1ACBZ-R7 Overview
Packaged in a 6-UFBGA, WLCSP case, the buffer op amp is ready to use. Buffer amps of this type are called Voltage Feedback-types. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 6 mark. There are a total of 6 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 1.8V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The op amp ic has an array of 6 pins on it. Regarding input offset voltage, buffer amplifier rates 3mV voltage. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~125°C. An 9μA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 120dB at all times. There are 1 channels on the operational amplifiers. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 3V. TAPE AND REEL is adopted to pack the instrumentation amplifier. Linear amplifier has a quiescent current of 9μA.
ADA4505-1ACBZ-R7 Features
6 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
ADA4505-1ACBZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4505-1ACBZ-R7 Instrumentational OP Amps applications.
- Video amplifiers
- Automotive sensors
- Radar
- pH (acidity)
- Industrial control system
- Power generator
- Power transmission
- Tablets
- Large motor controllers
- Hand-held batteries
