ADA4505-1ARJZ-R2
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4505 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 9μA |
| Quiescent Current | 9μA |
| Slew Rate | 0.006V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 50 kHz |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000002μA |
| Programmable Power | NO |
| Input Capacitance | 4.7pF |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4505-1ARJZ-R2 Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. Buffer amps of this type are called Voltage Feedback-types. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 5h termination of the year. Buffer amplifier has a total of 5 pins. The linear amplifier should be run at 1.8V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 5 pins on it. Regarding input offset voltage, buffer amplifier rates 500μV voltage. Surface Mount is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAn 9μA volt supply current is needed for this linear amplifier to operate. 120dB should remain the voltage gain. A linear amplifier like this has 1 circuits on it. There are a total of 1 channels available on the op amps. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 3V. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a result, linear amplifier's quiescent current is 9μA.
ADA4505-1ARJZ-R2 Features
5 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
ADA4505-1ARJZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4505-1ARJZ-R2 Instrumentational OP Amps applications.
- Signal transformation
- Gaming industry
- Proportional counter tubes
- Automatic control
- Car stereo
- Television broadcasting equipment
- Power transmission
- Power generator
- Automation control systems
- MP3
