ADA4505-1ARJZ-R7
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Operating Supply Current | 9μA |
| Quiescent Current | 9μA |
| Slew Rate | 0.006V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 50 kHz |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000002μA |
| Programmable Power | NO |
| Input Capacitance | 4.7pF |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4505 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
ADA4505-1ARJZ-R7 Overview
There is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. An op amp ic of the Voltage Feedback type. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be 5 terminations in the next few months. The total number of pins on linear amplifier is 5. Please take in mind that this instrumentation amplifier should be run at 1.8V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 5 pins on this chip. The input offset voltage is 3mV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using an 9μA supply current, this operational amplifier ics can be operated. Op amp is a member of the 120dB's 120dB family. Op amp ic has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3V voltage. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a quiescent current of 9μA in this operational amplifier circuit.
ADA4505-1ARJZ-R7 Features
5 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
ADA4505-1ARJZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4505-1ARJZ-R7 Instrumentational OP Amps applications.
- Industrial control system
- Medical imaging
- Tablets
- earphone
- Communication device
- High-frequency data acquisition systems
- Power control
- Exponential operation circuits
- Vehicle electronics
- High gain DC amplifier
