ADA4522-1ARMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4522 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 830μA |
| Slew Rate | 1.7V/μs |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 155 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~55V ±2.25V~27.5V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 1.5μV |
| Bandwidth | 2.7MHz |
| Unity Gain BW-Nom | 2700 kHz |
| Average Bias Current-Max (IIB) | 0.002μA |
| Supply Voltage Limit-Max | 60V |
| Voltage - Input Offset | 1.5μV |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4522-1ARMZ-R7 Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp of this type is a Zero-Drift-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins on it. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 1.5μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 830μA . During the manufacturing process, this buffer amplifier is divided into 1 circuits. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals.
ADA4522-1ARMZ-R7 Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
ADA4522-1ARMZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4522-1ARMZ-R7 Instrumentational OP Amps applications.
- Hand-held batteries
- Semiconductor detectors
- Industrial control system
- Thermocouples
- Signal transformation
- Professional videography
- Digital cameras
- Communication
- Test and measurement instruments
- Automatic control
