ADA4522-2ARMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4522 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 830μA |
| Slew Rate | 1.7V/μs |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~55V ±2.25V~27.5V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 1.5μV |
| Gain Bandwidth Product | 2.7MHz |
| Unity Gain BW-Nom | 2700 kHz |
| Voltage Gain | 137dB |
| Power Supply Rejection Ratio (PSRR) | 150dB |
| Supply Voltage Limit-Max | 60V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4522-2ARMZ-R7 Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. This is a Zero-Drift type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 8. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 1.5μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Operational amplifier can operate supply current at 830μA. There should be no change in the voltage gain at 137dB. A instrumentation amplifier like this has 2 circuits. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages.
ADA4522-2ARMZ-R7 Features
8 Pins
supply voltage of 5V
137dB voltage gain
Output Type: Rail-to-Rail
ADA4522-2ARMZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4522-2ARMZ-R7 Instrumentational OP Amps applications.
- Signal amplification
- Medical imaging
- Power generator
- Signal filtering
- High/low-pass filter circuit
- Multimedia playback equipment
- Active probe
- Logarithmic operation circuits
- Fast A/D and D/A converters
- Scintillation detectors
