ADA4528-1ACPZ-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | DMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4528 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.5mA |
| Quiescent Current | 1.4mA |
| Supply Current-Max | 2.2mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 160 dB |
| Current - Input Bias | 90pA |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V ±1.1V~2.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2.5μV |
| Bandwidth | 3.4MHz |
| Gain Bandwidth Product | 4MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 150dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 0.3μV |
| Settling Time | 10 μs |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 1kHz |
| Bias Current-Max (IIB) @25C | 0.0004μA |
| Programmable Power | NO |
| Input Capacitance | 33pF |
| Height | 800μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4528-1ACPZ-R2 Overview
In order to protect the op amps, a 8-WFDFN Exposed Pad, CSP case is used. Op amps are Zero-Drift types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 8 pins that make up the linear amplifier. Op amp ic rates 2.5μV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. A supply current of 1.5mA can be used to operate this linear amplifier. 130dB should be the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. For the packing of the instrumentation amplifier, TR is adopted. There is a quiescent current of 1.4mA in this operational amplifier circuit.
ADA4528-1ACPZ-R2 Features
8 Pins
supply voltage of 2.5V
130dB voltage gain
Output Type: Rail-to-Rail
ADA4528-1ACPZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4528-1ACPZ-R2 Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Industrial applications including automation
- PDA
- Integrator circuits
- Weak signal detection
- Communication
- Mobile phone
- Portable docking station
- Signal operation
- Professional videography
