ADA4528-1ARMZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4528 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.5mA |
| Quiescent Current | 1.4mA |
| Supply Current-Max | 2.2mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 160 dB |
| Current - Input Bias | 90pA |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V ±1.1V~2.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2.5μV |
| Gain Bandwidth Product | 4MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 150dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 0.3μV |
| Settling Time | 10 μs |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0004μA |
| Programmable Power | NO |
| Input Capacitance | 33pF |
| Wideband | NO |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4528-1ARMZ-RL Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a Zero-Drift type op amp. A Tape & Reel (TR) case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 2.5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 8 pins on this chip. The input offset voltage is 2.5μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using a supply current of 1.5mA , this buffer op amp will be able to operate. The voltage gain should stay at 130dB. There are 1 channels on the operational amplifiers. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The instrumentation amplifier is packed in the form of TAPE AND REEL. Linear amplifier has a quiescent current of 1.4mA.
ADA4528-1ARMZ-RL Features
8 Pins
supply voltage of 2.5V
130dB voltage gain
Output Type: Rail-to-Rail
ADA4528-1ARMZ-RL Applications
There are a lot of Analog Devices Inc. ADA4528-1ARMZ-RL Instrumentational OP Amps applications.
- Exponential operation circuits
- E-book readers
- PDA
- Radiation thermometry transducers
- Displayers for aircraft and air transportation control systems
- Computer workstations
- Industrial control system
- ECG equipment
- High input resistance broadband
- Professional videography
