ADA4528-2ACPZ-R7
| Parameters | |
|---|---|
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1GOhm |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | DMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4528 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 3mA |
| Quiescent Current | 1.5mA |
| Supply Current-Max | 4.4mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 160 dB |
| Current - Input Bias | 125pA |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V ±1.1V~2.25V |
| Input Offset Voltage (Vos) | 2.5μV |
| Gain Bandwidth Product | 3.4MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 150dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 0.3μV |
| Settling Time | 10 μs |
| Current - Output / Channel | 40mA |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 6.5MHz |
| Bias Current-Max (IIB) @25C | 0.0004μA |
| Programmable Power | NO |
| Input Capacitance | 33pF |
| Wideband | NO |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
ADA4528-2ACPZ-R7 Overview
In order to protect the op amps, a 8-WFDFN Exposed Pad, CSP case is used. A Zero-Drift-type buffer amplifier is shown here. It comes in a Cut Tape (CT) case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 2.5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 8-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 2.5μV voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . This op amp can operate from a supply current at 3mA. It is recommended to keep the voltage gain at 130dB at all times. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There are 2 elements in this buffer amplifier. It is used TAPE AND REEL to pack the op amps. The quiescent current is 1.5mA. It is recommended to keep the instrumentation amplifier resistance within the range of 1GOhm.
ADA4528-2ACPZ-R7 Features
8 Pins
supply voltage of 2.5V
130dB voltage gain
Output Type: Rail-to-Rail
Resistance of 1GOhm
ADA4528-2ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4528-2ACPZ-R7 Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Signal amplification
- Signal filtering
- Digital cameras
- Commercial audio systems
- Signal operation
- Mobile phone
- Ultrasound transducers
- PDA
- Automotive sensors
