ADA4528-2ARMZ

2 Channels 40mA per Channel 125pA 160 dB Instrumentational OP Amps 0.0006μA 2.2V~5.5V ±1.1V~2.75V ADA4528 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADA4528-2ARMZ
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 508
Description: 2 Channels 40mA per Channel 125pA 160 dB Instrumentational OP Amps 0.0006μA 2.2V~5.5V ±1.1V~2.75V ADA4528 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 months ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Weight	139.989945mg
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	1GOhm
Subcategory	Operational Amplifier
Technology	DMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADA4528
Pin Count	8
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	3mA
Quiescent Current	1.5mA
Supply Current-Max	4.4mA
Slew Rate	0.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Zero-Drift
Common Mode Rejection Ratio	160 dB
Current - Input Bias	125pA
Voltage - Supply, Single/Dual (±)	2.2V~5.5V ±1.1V~2.75V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	2.5μV
Bandwidth	3.4MHz
Gain Bandwidth Product	4MHz
Unity Gain BW-Nom	3000 kHz
Voltage Gain	139dB
Average Bias Current-Max (IIB)	0.0006μA
Power Supply Rejection Ratio (PSRR)	150dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	0.3μV
Settling Time	10 μs
Low-Bias	YES
Micropower	NO
-3db Bandwidth	6.5MHz
Max Frequency	1kHz
Bias Current-Max (IIB) @25C	0.0004μA
Programmable Power	NO
Input Capacitance	33pF
Input Voltage Noise Density	5.9nV/sqrt Hz
Height	950μm
Length	3.2mm
Width	3.2mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADA4528-2ARMZ Overview

The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp ic of the Zero-Drift type. There is a Tube case that is delivered with the instrumentation amplifiers. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 8 pins on this chip. The input offset voltage is 2.5μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 3mA and 10 . Maintain 139dB as the voltage gain. On the buffer amps, there are 2 channels that can be used. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There is an 1.5mA quiescent current running through op amp ic. Instrumentation amplifier resistance should stay within the range of 1GOhm.