ADA4530-1ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4530 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 900μA |
| Slew Rate | 1.4V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 73 dB |
| Current - Input Bias | 0.02pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Output Current per Channel | -30mA |
| Input Offset Voltage (Vos) | 8μV |
| Bandwidth | 2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 155dB |
| Average Bias Current-Max (IIB) | 2.5e-7μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Current - Output / Channel | 15mA |
| -3db Bandwidth | 5.5MHz |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.75mm |
| Length | 4.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADA4530-1ARZ Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. A Tube case is used for delivering the op amp. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 8μV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using an 900μA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 155dB at all times. As far as the device is concerned, buffer amplifier has 1 channels. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has.
ADA4530-1ARZ Features
8 Pins
supply voltage of 5V
155dB voltage gain
Output Type: Rail-to-Rail
ADA4530-1ARZ Applications
There are a lot of Analog Devices Inc. ADA4530-1ARZ Instrumentational OP Amps applications.
- Band-pass filter
- Power control
- Blood pressure sensors
- Micro signal measurement
- Communication
- Television
- Medical instruments
- Cinema or auditorium audio system
- earphone
- Digital cameras
