ADA4610-2ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4610 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-4.5/+-15/9/30V |
| Number of Channels | 2 |
| Operating Supply Current | 3mA |
| Quiescent Current | 1.6mA |
| Supply Current-Max | 4mA |
| Slew Rate | 61V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~15V |
| Output Current per Channel | 79mA |
| Input Offset Voltage (Vos) | 400μV |
| Gain Bandwidth Product | 16.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 15400 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| -3db Bandwidth | 9.5MHz |
| Input Voltage Noise Density | 14nV/sqrt Hz |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4610-2ACPZ-R7 Overview
The linear amplifier is packaged in a 8-WFDFN Exposed Pad, CSP case which makes it easy for the consumer to handle. Buffer amps of this type are called J-FET-types. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. Op amp ic rates 400μV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . You can run this op amp ic on 3mA . 100dB should be the voltage gain. Op amp ic has 2 channels. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. Currently, linear amplifier is operating with a quiescent current of 1.6mA.
ADA4610-2ACPZ-R7 Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
ADA4610-2ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4610-2ACPZ-R7 Instrumentational OP Amps applications.
- Medical instruments
- Blood pressure sensors
- Radar
- pH (acidity)
- Vehicle electronics
- Voltage regulation circuit
- MP3
- Video conversion and routing
- Professional videography
- Proportional counter tubes
