Parameters |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
115 dB |
Current - Input Bias |
5pA |
Voltage - Supply, Single/Dual (±) |
±4.5V~15V |
Output Current per Channel |
79mA |
Input Offset Voltage (Vos) |
400μV |
Gain Bandwidth Product |
16.3MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
15400 kHz |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.0015μA |
Power Supply Rejection Ratio (PSRR) |
125dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Low-Bias |
YES |
-3db Bandwidth |
9.5MHz |
Input Voltage Noise Density |
14nV/sqrt Hz |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
540.001716mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADA4610 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Power Supplies |
+-4.5/+-15/9/30V |
Number of Channels |
2 |
Operating Supply Current |
3mA |
Quiescent Current |
1.6mA |
Supply Current-Max |
4mA |
Slew Rate |
61V/μs |
Architecture |
VOLTAGE-FEEDBACK |
ADA4610-2ARZ-R7 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. A total of 8 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 400μV. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 3mA . Maintain 100dB as the voltage gain. There are 2 channels on the operational amplifiers. On the output type, there are Rail-to-Rail different types of op amps. The linear amplifier is packaged by using a TAPE AND REEL axis. The quiescent current is 1.6mA.
ADA4610-2ARZ-R7 Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
ADA4610-2ARZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4610-2ARZ-R7 Instrumentational OP Amps applications.
- Voltage regulation circuit
- Car stereo
- Ultrasound transducers
- Television broadcasting equipment
- single/dual op amp sum and difference circuits
- Exponential operation circuits
- MP3
- ECG equipment
- Commercial audio systems
- High-frequency data acquisition systems