ADA4610-2ARZ-RL
| Parameters | |
|---|---|
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4610 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-4.5/+-15/9/30V |
| Number of Channels | 2 |
| Operating Supply Current | 3mA |
| Quiescent Current | 1.6mA |
| Supply Current-Max | 4mA |
| Slew Rate | 61V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~15V |
| Output Current per Channel | 79mA |
| Input Offset Voltage (Vos) | 400μV |
| Gain Bandwidth Product | 16.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 15400 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| -3db Bandwidth | 9.5MHz |
| Input Voltage Noise Density | 14nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
ADA4610-2ARZ-RL Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp of this type is a J-FET-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. In this case, there are 8 pins on the board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 8 pins. The input offset voltage is 400μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using a supply current of 3mA , this buffer op amp will be able to operate. It is a member of the 100dB's 100dB family. 2 channels are available on the instrumentation amplifier. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. It is used TAPE AND REEL to pack the op amps. 1.6mA quiescent currents are flowing through buffer op amp.
ADA4610-2ARZ-RL Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
ADA4610-2ARZ-RL Applications
There are a lot of Analog Devices Inc. ADA4610-2ARZ-RL Instrumentational OP Amps applications.
- Laptop
- Television
- Power generator
- Proportional counter tubes
- Exponential operation circuits
- Radiation thermometry transducers
- Information processing
- Portable electronic products powered by batteries
- Television broadcasting equipment
- pH (acidity)
