ADA4610-2BRZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4610 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 3mA |
| Quiescent Current | 1.6mA |
| Supply Current-Max | 4mA |
| Slew Rate | 61V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~15V |
| Output Current per Channel | 79mA |
| Input Offset Voltage (Vos) | 400μV |
| Gain Bandwidth Product | 16.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 15400 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Low-Bias | YES |
| -3db Bandwidth | 9.5MHz |
| Input Voltage Noise Density | 14nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4610-2BRZ-R7 Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. This is a J-FET type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are included on the operational amplifiers. Op amp ic rates 400μV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 3mA . Op amp is a member of the 100dB's 100dB family. Op amp ic has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. Buffer amplifier has a quiescent current of 1.6mA.
ADA4610-2BRZ-R7 Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
ADA4610-2BRZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4610-2BRZ-R7 Instrumentational OP Amps applications.
- Television broadcasting equipment
- Laptop
- Band-pass filter
- Comparator
- earphone
- Signal filtering
- single/dual op amp sum and difference circuits
- Power control
- Automation control systems
- Blood pressure sensors
