ADA4610-2BRZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4610 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 3mA |
| Quiescent Current | 1.6mA |
| Supply Current-Max | 4mA |
| Slew Rate | 61V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~15V |
| Output Current per Channel | 79mA |
| Input Offset Voltage (Vos) | 400μV |
| Gain Bandwidth Product | 16.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 15400 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Low-Bias | YES |
| -3db Bandwidth | 9.5MHz |
| Input Voltage Noise Density | 14nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4610-2BRZ-RL Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp of this type is a J-FET-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 400μV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . A supply current of 3mA can be used to operate this linear amplifier. The voltage gain should stay at 100dB. As far as the device is concerned, buffer amplifier has 2 channels. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. This linear amplifier pack is based on the TAPE AND REEL axis. There is a quiescent current of 1.6mA in this operational amplifier circuit.
ADA4610-2BRZ-RL Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
ADA4610-2BRZ-RL Applications
There are a lot of Analog Devices Inc. ADA4610-2BRZ-RL Instrumentational OP Amps applications.
- Test and measurement instruments
- Strain gauges
- Broadcasting
- Comparator
- single/dual op amp sum and difference circuits
- Integrator circuits
- Industrial control system
- Precision measurement
- Industrial applications including automation
- High-frequency data acquisition systems
