ADA4610-4ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4610 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 4 |
| Operating Supply Current | 1.6mA |
| Max Supply Current | 1.7mA |
| Quiescent Current | 1.6mA |
| Slew Rate | 61V/μs |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~15V |
| Output Current per Channel | 79mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 16.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 15400 kHz |
| Voltage Gain | 98dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 117dB |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 400μV |
| -3db Bandwidth | 9.5MHz |
| Max Frequency | 10kHz |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4610-4ARZ Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. A J-FET-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 14. In this case, there are 14 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 14 pins on it. In terms of input offset voltage, operational amplifier rates 1mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 1.6mA . 98dB should be the voltage gain. A instrumentation amplifier like this has 4 circuits. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There is an 1.6mA quiescent current running through op amp ic.
ADA4610-4ARZ Features
14 Pins
supply voltage of 5V
98dB voltage gain
Output Type: Rail-to-Rail
ADA4610-4ARZ Applications
There are a lot of Analog Devices Inc. ADA4610-4ARZ Instrumentational OP Amps applications.
- Switching amplifier
- Hand-held batteries
- Signal transformation
- Power generator
- Differentiator circuits
- Tablets
- Semiconductor detectors
- single/dual op amp sum and difference circuits
- Vehicle electronics
- Image computer boards
