ADA4625-1ARDZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4625 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Current - Supply | 4mA |
| Slew Rate | 48V/μs |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 15pA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 33mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 18MHz |
| Neg Supply Voltage-Nom (Vsup) | -18V |
| Unity Gain BW-Nom | 18000 kHz |
| Voltage Gain | 150dB |
| Average Bias Current-Max (IIB) | 0.0055μA |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 15μV |
| -3db Bandwidth | 16MHz |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
ADA4625-1ARDZ Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width) Exposed Pad-case to contain the op amp ic. J-FET-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 8. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 18V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 100μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. It is recommended to keep the voltage gain at 150dB at all times. On this buffer amplifier, there are 1 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There is a recommendation that this electrical part be used with a supply with 4mA current rating.
ADA4625-1ARDZ Features
8 Pins
supply voltage of 18V
150dB voltage gain
Output Type: Rail-to-Rail
ADA4625-1ARDZ Applications
There are a lot of Analog Devices Inc. ADA4625-1ARDZ Instrumentational OP Amps applications.
- earphone
- Oscilloscopes
- Polarized electrodes
- Radiation thermometry transducers
- Displayers for aircraft and air transportation control systems
- Professional videography
- Proportional counter tubes
- Industrial applications including automation
- Wireless base stations
- Portable media players
