ADA4627-1ACPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4627 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 7mA |
| Quiescent Current | 7mA |
| Slew Rate | 84V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 116 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 19MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 19000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 103dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 36V |
| Voltage - Input Offset | 120μV |
| Settling Time | 450 ns |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000005μA |
| Programmable Power | NO |
| Input Capacitance | 7pF |
| Neg Supply Voltage-Max (Vsup) | -36V |
| Wideband | NO |
| Input Voltage Noise Density | 16.5nV/sqrt Hz |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4627-1ACPZ-RL Overview
Op amp is packaged in 8-WFDFN Exposed Pad, CSP case. An op amp of this type is a J-FET-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 8 pins. There is an input offset voltage of 200μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . As long as the supply current of the chip does not exceed 7mA, this op amp ic can operate. Maintain 120dB as the voltage gain. On the buffer amps, there are 1 channels that can be used. The instrumentation amplifier is packed in the form of TR. There is an 7mA quiescent current in linear amplifier.
ADA4627-1ACPZ-RL Features
8 Pins
supply voltage of 15V
120dB voltage gain
ADA4627-1ACPZ-RL Applications
There are a lot of Analog Devices Inc. ADA4627-1ACPZ-RL Instrumentational OP Amps applications.
- Strain gauges
- Exponential operation circuits
- Switching amplifier
- Multiplication circuits
- Power generator
- Subtraction operation circuits
- Television broadcasting equipment
- Gaming industry
- Home audio systems
- Professional videography
