ADA4638-1ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4638 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 850μA |
| Quiescent Current | 850μA |
| Slew Rate | 1.5V/μs |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 142 dB |
| Current - Input Bias | 45pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~30V ±2.25V~15V |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 4.5μV |
| Bandwidth | 2.5MHz |
| Gain Bandwidth Product | 1.5MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 150dB |
| Average Bias Current-Max (IIB) | 0.00023μA |
| Power Supply Rejection Ratio (PSRR) | 143dB |
| Supply Voltage Limit-Max | 33V |
| Voltage - Input Offset | 0.5μV |
| Settling Time | 4 μs |
| Input Capacitance | 9pF |
| Input Voltage Noise Density | 70nV/sqrt Hz |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4638-1ACPZ-R7 Overview
The linear amplifier is packaged in a 8-WFDFN Exposed Pad, CSP case. An op amp ic of the Zero-Drift type. There is a Cut Tape (CT) case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 8 mark. A total of 8 pins are located on this board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 4.5μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using a supply current of 850μA , this buffer op amp will be able to operate. The voltage gain should stay at 150dB. Op amp ic has 1 channels. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. Currently, linear amplifier is operating with a quiescent current of 850μA.
ADA4638-1ACPZ-R7 Features
8 Pins
supply voltage of 5V
150dB voltage gain
Output Type: Rail-to-Rail
ADA4638-1ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4638-1ACPZ-R7 Instrumentational OP Amps applications.
- Ultrasound transducers
- Medical imaging
- Biopotential
- MP3
- High speed sample
- Band-pass filter
- pH (acidity)
- Information processing
- Polarized electrodes
- High input resistance broadband
