ADA4661-2ARMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4661 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 630μA |
| Quiescent Current | 630μA |
| Slew Rate | 2V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 3V~18V ±1.5V~9V |
| Output Current per Channel | 220mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 4MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Average Bias Current-Max (IIB) | 0.00075μA |
| Power Supply Rejection Ratio (PSRR) | 145dB |
| Voltage - Input Offset | 30μV |
| -3db Bandwidth | 2.1MHz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4661-2ARMZ-R7 Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 10V battery. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 100μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. An 630μA volt supply current is needed for this linear amplifier to operate. On this instrumentation amplifier, there are 2 circuits that are connected together. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There is an 630μA quiescent current running through op amp ic.
ADA4661-2ARMZ-R7 Features
8 Pins
supply voltage of 10V
Output Type: Rail-to-Rail
ADA4661-2ARMZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4661-2ARMZ-R7 Instrumentational OP Amps applications.
- Micro signal measurement
- Semiconductor detectors
- Broadcasting
- Oscilloscopes
- Active probe
- Signal operation
- Weighing systems
- Fission chambers
- Test and measurement instruments
- Displayers for aircraft and air transportation control systems
