ADA4691-4ACPZ-R7
| Parameters | |
|---|---|
| Bias Current-Max (IIB) @25C | 0.000005μA |
| JESD-609 Code | e3 |
| Input Capacitance | 7pF |
| Pbfree Code | no |
| Input Voltage Noise Density | 16nV/sqrt Hz |
| Part Status | Active |
| Height Seated (Max) | 0.8mm |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Length | 3mm |
| Number of Terminations | 16 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| ECCN Code | EAR99 |
| RoHS Status | ROHS3 Compliant |
| Subcategory | Operational Amplifier |
| Lead Free | Contains Lead |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4691 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Power Supplies | +-1.35/+-2.5/2.7/5V |
| Number of Channels | 4 |
| Operating Supply Current | 180μA |
| Quiescent Current | 180μA |
| Supply Current-Max | 1.1mA |
| Slew Rate | 1.3V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.5V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 3.6MHz |
| Unity Gain BW-Nom | 3600 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.00036μA |
| Factory Lead Time | 1 Week |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Low-Offset | NO |
| Contact Plating | Tin |
| Frequency Compensation | YES |
| Mounting Type | Surface Mount |
| Supply Voltage Limit-Max | 6V |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Voltage - Input Offset | 500μV |
| Surface Mount | YES |
| Settling Time | 1.5 μs |
| Number of Pins | 16 |
| Low-Bias | YES |
| Operating Temperature | -40°C~125°C |
| Micropower | YES |
| Packaging | Tape & Reel (TR) |
ADA4691-4ACPZ-R7 Overview
There is a 16-WFQFN Exposed Pad, CSP case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. A total of 16 terminations have been reported in the past few weeks. A total of 16 pins are located on this board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 16 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 2.5mV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 180μA . It is a member of the 110dB's 110dB family. There are 4 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of instrumentation amplifier is rated 3V voltage. The linear amplifier is packaged by using a TAPE AND REEL axis. As a result, linear amplifier's quiescent current is 180μA.
ADA4691-4ACPZ-R7 Features
16 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
ADA4691-4ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4691-4ACPZ-R7 Instrumentational OP Amps applications.
- Mobile phone
- Division circuits
- Home audio systems
- Power control
- Signal operation
- Proportional operation circuits
- Medical instruments
- Semiconductor detectors
- Portable media players
- Automatic control
