ADA4691-4ACPZ-RL
| Parameters | |
|---|---|
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000005μA |
| Input Capacitance | 7pF |
| Input Voltage Noise Density | 16nV/sqrt Hz |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4691 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Power Supplies | +-1.35/+-2.5/2.7/5V |
| Number of Channels | 4 |
| Operating Supply Current | 180μA |
| Quiescent Current | 180μA |
| Supply Current-Max | 1.1mA |
| Slew Rate | 1.3V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.5V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 3.6MHz |
| Unity Gain BW-Nom | 3600 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.00036μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 500μV |
| Settling Time | 1.5 μs |
| Low-Bias | YES |
ADA4691-4ACPZ-RL Overview
A 16-WFQFN Exposed Pad, CSP case is used to package the op amp. An op amp of this type is a Voltage Feedback-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. We are approaching the 16h termination of the year. It consists of a total of 16 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 16 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 2.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 180μA . Keeping the voltage gain at 110dB is the best course of action. On the buffer amps, there are 4 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 3V. TAPE AND REEL is adopted to pack the instrumentation amplifier. The current is quiescent at 180μA.
ADA4691-4ACPZ-RL Features
16 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
ADA4691-4ACPZ-RL Applications
There are a lot of Analog Devices Inc. ADA4691-4ACPZ-RL Instrumentational OP Amps applications.
- Hand-held batteries
- E-book readers
- Car stereo
- Precision measurement
- High/low-pass filter circuit
- Automotive sensors
- Navigation
- Video computer boards
- Information processing
- High gain DC amplifier
