ADA4692-4ARUZ-RL
| Parameters | |
|---|---|
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.5V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 3.6MHz |
| Unity Gain BW-Nom | 3600 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.00036μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 500μV |
| Settling Time | 1.5 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000005μA |
| Input Capacitance | 7pF |
| Input Voltage Noise Density | 16nV/sqrt Hz |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4692 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Power Supplies | 2.7/5V |
| Number of Channels | 4 |
| Operating Supply Current | 720μA |
| Quiescent Current | 180μA |
| Supply Current-Max | 1.1mA |
| Slew Rate | 1.3V/μs |
| Amplifier Type | Voltage Feedback |
ADA4692-4ARUZ-RL Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. Op amps are Voltage Feedback types of amplifier on the chip. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. In total, there are 14 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 14 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 2.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. A supply current of 720μA can be used to operate this linear amplifier. Keeping the voltage gain at 110dB is the best course of action. On the buffer amps, there are 4 channels that can be used. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 3V voltage. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is an 180μA quiescent current in linear amplifier.
ADA4692-4ARUZ-RL Features
14 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
ADA4692-4ARUZ-RL Applications
There are a lot of Analog Devices Inc. ADA4692-4ARUZ-RL Instrumentational OP Amps applications.
- Division circuits
- Signal filtering
- Television broadcasting equipment
- single/dual op amp sum and difference circuits
- Blood pressure sensors
- Switching amplifier
- Signal operation
- Portable electronic products powered by batteries
- Mobile phone
- Power transmission
