ADA4805-1ARJZ-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4805 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 500μA |
| Output Current | 58mA |
| Min Input Voltage | 2.7V |
| Slew Rate | 160V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 133 dB |
| Current - Input Bias | 470nA |
| Max Input Voltage | 10V |
| Voltage - Supply, Single/Dual (±) | 3V~5V ±1.5V~5V |
| Output Current per Channel | 73mA |
| Input Offset Voltage (Vos) | 9μV |
| Bandwidth | 120MHz |
| Gain Bandwidth Product | 120MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 109dB |
| Average Bias Current-Max (IIB) | 0.8μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 5.5V |
| -3db Bandwidth | 105MHz |
| Max Frequency | 100kHz |
| Dual Supply Voltage | 3V |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4805-1ARJZ-R2 Overview
Packaging for the buffer amplifier is in the form of a SOT-23-6 case. Buffer amps of this type are called General Purpose-types. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape (CT) case. During the past two weeks, there have been close to 6 terminations. A total of 6 pins are located on this board. This linear amplifier should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 6-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 9μV voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Operational amplifier can operate supply current at 500μA. It is recommended to keep the voltage gain at 109dB at all times. A instrumentation amplifier like this has 1 circuits. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has.
ADA4805-1ARJZ-R2 Features
6 Pins
supply voltage of 5V
109dB voltage gain
Output Type: Rail-to-Rail
ADA4805-1ARJZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4805-1ARJZ-R2 Instrumentational OP Amps applications.
- Signal amplification
- Television
- Information processing
- Division circuits
- Computer workstations
- earphone
- Differentiator circuits
- Video computer boards
- Integrator circuits
- Logarithmic operation circuits
