ADA4805-1ARJZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4805 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 500μA |
| Slew Rate | 160V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 133 dB |
| Current - Input Bias | 470nA |
| Voltage - Supply, Single/Dual (±) | 3V~5V ±1.5V~5V |
| Output Current per Channel | 73mA |
| Input Offset Voltage (Vos) | 9μV |
| Bandwidth | 105MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 109dB |
| Average Bias Current-Max (IIB) | 0.8μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 5.5V |
| Dual Supply Voltage | 3V |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4805-1ARJZ-R7 Overview
The linear amplifier is packaged in a SOT-23-6 case which makes it easy for the consumer to handle. An op amp of this type is a General Purpose-type. A Cut Tape (CT) case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 6. The pins on this board total to 6 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 6-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 9μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 500μA and 10 . 109dB should be the voltage gain. There are 1 circuits on op amps. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits.
ADA4805-1ARJZ-R7 Features
6 Pins
supply voltage of 5V
109dB voltage gain
Output Type: Rail-to-Rail
ADA4805-1ARJZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4805-1ARJZ-R7 Instrumentational OP Amps applications.
- Ultrasound transducers
- Home audio systems
- Switching amplifier
- Car stereo
- pH (acidity)
- Signal filtering
- Video computer boards
- Subtraction operation circuits
- Industrial applications including automation
- Vehicle electronics
